China ferrite magnet factory,motor magnets manufactuer

Trade News

  • Furniture magnet market share

    Furniture magnet market share

    Furniture magnet, widely use in kichen cabinet door(or drawers) for holding.   It is made by plastic shell (or) steel shell and ferrite magnet inside(or neodymium magnet). Plastic shell+ferrite magnet inside, its price will be cheaper, of course iron shell+neodymium magnt, its price will be higher. ...

    Read more

  • There has 4 kinds glue to be used in the motor commonly, which one you use?

    There has 4 kinds glue to be used in the motor commonly, which one you use?

    Today let’s introduce several kinds of glue which used for the electric motors. Usually, some motor customers often asking, let’s take a look. 1. Anaerobic adhesive No heating required. 2. Epoxy resin structural glue Belongs to high temperature epoxy, baking at 180° for 5 minutes, can pa ...

    Read more

  • What the difference between flated ring magnet and rounded ring magnet?

    What the difference between flated ring magnet and rounded ring magnet?

    Flated ring means ring magnet’s surface is flat, whatever front side or back side all of them are flat. Flated ring magnet is rarely to be used in the market. But some of customers has its request because it will be easily for their assembly. Rounded ring means ring magnet’s surface is rounded, it l ...

    Read more

  • How many types for motor magnets?

    How many types for motor magnets?

    Here motor we said is DC motor, because AC motor do not use magnets. There are 4 types of magnets to use at the application of motor: Ndfeb magnet in arc shape Magnetic is strong, the size of the motor can be smaller while maintaining the same power, and the starting                        current ...

    Read more

  • Is it a must to use magnets for servo motors?

    Is it a must to use magnets for servo motors?

    Servo motor is divided into AC Synchronous and AC Asynchronous. If it is AC synchronous motor it has to use magnet parts, the main material is Ndfeb; if it is AC asynchronous motor, that is not necessarily to use magnetic materials. What kind of magnet of the rotor inside the servo motor? The answer ...

    Read more

  • What is eccentric circles segmented magnets?

    What is eccentric circles segmented magnets?

    Circles that have different centres are called Eccentric Circles, means the external R and the inner R are not on the same center. Below is 2D drawing for your reference. Eccentric circles segmented shape magnets mainly to be used in permanent magnet synchronous motor, the purpose is to generate a s ...

    Read more

  • Wave-shape showing for multi-pole ferrite ring- saddle shaped and sinusoidal

    Wave-shape showing for multi-pole ferrite ring- saddle shaped and sinusoidal

    Radial multi-pole ferrite ring, with high surface magnetic flux density, absolutely its performance is better than traditional tile-shaped ferrite magnet, magnetic path design is completely different with radiation ring. Lots of customers use tile-shape ferrite magnet to make the samples, then creat ...

    Read more

  • Where to buy existing ferrite magnets in arc shape?

    Where to buy existing ferrite magnets in arc shape?

    A complete permanent magnet motor, the purchase of magnets is very important. But where we can get the existing ferrite magnet in arc shape? As you know, there are mainly two kinds of material magnet used in motors, they are NdFeB in arc shape and ferrite in arc shape. But there is no mould tooling ...

    Read more

  • Is there a non-friable magnet?

    Is there a non-friable magnet?

    First of all, most of the magnets are easy fragile, not the problem of the quality of magnets. Here we said “most” is because there is still a small part of magnets that are not easy fragile. chip-off and cracks on ferrite magnets   In fact, the magnet is fragile will be depend on i ...

    Read more

  • HOW IS FERRITE MADE

    HOW IS FERRITE MADE

    Mixes of metal oxide powders and various binding agents are placed into a mold, heated, and squeezed until the ceramic is created. This process is called sintering. If the ferrite is to be made into a magnet, the hot ferrite may be magnetized so that when it cools, the magnetism is retained. Ferrite ...

    Read more